Uncategorized

Top 9 Government Badge Holder – Badge Holders

As an Amazon Associate I earn from qualifying purchases.

1. GOVO

#ad

GOVO Badge Holder/Wallet, Durable Polycarbonate ID/Credit Holder with Metal Clip and 4 Cards Slot Holds 1to 4 Cards Black

#ad
GOVO #ad - The clip is made from manganese steel making it strong and durable. Designed and engineered by govo in ohio, usa. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards.

Unlike plastic retainer, metal spring does not lose elasticity. You can carry your credit cards, driver license and work ID all in one in this compact holder. Durable and light weight: the holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. The spring holds cards on the sides so it won’t damage your cards or let them slip out.

Weights 1. 4 oz. The steel clip can also be used as a cash clip. Patented clip: the first and only badge holder with a metal clip allow you to carry your ID on your belt, pocket, key chain, backpack or a lanyard. The opening on top of the clip is designed for connecting to lanyard or carabiner. Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity.
BrandGOVO #ad
ManufacturerGOVO #ad
Height0.38 Inches
Length3.8 Inches
Weight0.08 Pounds
Width2.6 Inches
Part NumberGOVO_BK_P

2. ID Stronghold

#ad

RFID Blocking Secure Badge Holder, ID Stronghold, Duolite 2 Card ID Holder, Heavy Duty Hard Plastic ID Badge Holder, Poly Carbonate, USA Molded and Assembled, FIPS 201 Approved, Black

#ad
ID Stronghold #ad - Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Indestructible: Molded from Poly Carbonate for military level toughness and durability. Slim design: looks sharp and available in 9 colors to match your uniform, work or business attire. Usa designed, molded and assembled - Our slim polycarbonate frame is tough as nails and will last you for years!2 card holder: conveniently carry two key cards, held tight so you never lose your identification.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.31 Inches
Length4 Inches
Weight0.04 Pounds
Width2.38 Inches
Part NumberIDSH2004-001B
ModelIDSH2004-001B

3. GOVO

#ad

GOVO Badge Holder, Without Clip Version, Durable Polycarbonate ID Card Holder Holds 1 to 4 Cards Black

#ad
GOVO #ad - Built to last: the eyelet for connecting to lanyard or carabiner is made from manganese steel making it strong and durable. This is the light weight without-clip version of govo t4 badge Holder.

Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity. Designed and engineered by govo in ohio, usa. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. You can carry your credit cards, driver license and work ID all in one in this compact holder. It weights 1. 2 oz. Unlike plastic retainer, metal spring does not lose elasticity. The holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. The spring holds cards on the sides so it won’t damage your cards or let them slip out.
BrandGOVO #ad
ManufacturerGOVO #ad
Part NumberNC_90000

4. ELV

#ad

ELV Badge Holder with Zipper, 1 Side RFID Blocking Pocket and 20 inch Neck Lanyard Strap for Offices ID, Driver Licence Black, PU Leather ID Badge Card Holder Wallet with 5 Card Slots, School ID

#ad
ELV #ad - Material: id holder and lanyard are made by pu leather, and combine with top grade hardware with safety side zipper and back closer. This badge holder with large capacity. Id window with clear cover features visibility and protection, event or location passes, name cards or business cards, makes it easy to scan ID Cards.

No need to worry about cards could accidentally slip out or lanyard rips any more. Id's, cash, keys - all of these could fit into this specially designed PU LEATHER badge holder. Size: holder size: 4. 8"l x 3. 5"w12. 2cm x 8. 9cm; 20"lanyard full round length. Strong lanyard: 1pc strong yet soft 20" PU Leather detachable Neck Lanyard for the holder.

Badge holder structure: 1 clear id window + 1 open card slot with pull tab front + 3 covered card slots back + 1 rfid blocked cash slot with zipper pocket side. Innovation design: great badge holder for those need multiple badges, laundry card, suitable for ID badges, School ID, cards, tickets and money Offices, drivers license, Government Employees and More, Airports, debit cards, etc. Front anf back Card Slots for easy management and access.
BrandELV #ad
ManufacturerELV #ad
Height4.8 Inches
Length5.8 Inches
Weight50 Grams
Width0.5 Inches
Part NumberID-Holder-PU-Black

5. ID Stronghold

#ad

RFID Blocking 2 Card ID Badge Holder with Lanyard and Retractable Reel, PIV, FIPS 201 Approved, ID Stronghold Secure Badge Holder Duolite, Heavy Duty Plastic Badge Protector, CAC and Work Cards

#ad
ID Stronghold #ad - Rfid shielded - protect your contactless cards from electronic pickpockets with the industry's best. Lanyard & reel included - 36 x 3/8" Lanyard with J Hook & Carabiner Retractable Badge Reel. Id stronghold is the original rfid blocking Company with FIPS 201 Approval for all our ID holders. Usa designed, molded and assembled - our slim polycarbonate frame is tough as nails and will last you for years! 2 card holder - securely holds one card on each side so both cards are easily displayed.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height1 Inches
Length5 Inches
Weight0.09 Pounds
Width4 Inches
Part NumberIDSH2047

6. ID Stronghold

#ad

Secure Badgeholder Classic and Lanyard Combo with IDSH Badge Reel Black/Black with Reel

#ad
ID Stronghold #ad - Id stronghold made the first ever fipS 201 approved shielded holders and has more FIPS 201 approved shielded products than any other manufacturer. Patented squeeze-to-read technology for ease of use. Let go and card automatically becomes shielded again.

Holds 1 contactless rfid id card and blocks card from being scanned without your knowledge. Physically protects card, us government piv, weather and water resistant. This holder is designed for 13. 56mhz id cards such as the military CAC, HID iClass and more. No more removing your card from a shielded holder to be read at access point. Fips 201 approved. If you have a 125khz hid prox card you should order our BloxProx trm version as it protects both frequencies.

The combo includes one classic badgeholder, one 36 inch 914mm long and 3/8" inch 10mm wide lanyard with polyester flat braided material, and one IDSH Logo Badge Reel that’s good for 100, 000+ Pulls! There’s a safety break away and a wide no twist flat hook on the lanyard. True stainless steel spring clips. Our classic badgeholder is molded and assembled in the USA. Simply squeeze the top like a clip board and the card shielding is removed and card can be read.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height1 Inches
Length6 Inches
Width4 Inches
Part NumberIDSH104

7. Specialist ID

#ad

Specialist ID Vertical Top Load Three Card Badge Holder, Hard Plastic with Heavy Duty Breakaway Lanyard w Quick Release Metal Clip & Key Ring One Holder / 3 Cards Inside Royal Blue

#ad
Specialist ID #ad - Badgeholder with heavy duty safety break away neck cord lanyard - Protect Your Valuable Access, CAC, PIV, TWIC or Government Employee Name Badge from Damage and Loss. Clear front window - front badge has visible display for picture ID’s, Dual Thumb Lever on the Back Can Slide up Smart Chip Cards or Swipe & RFID Prox Access Cardbadges.

Rigid & rugged polycarbonate plastic - hard plastic vertical format i. D. Top loading & fully enclosed for 2 - 3 cards - all cards load from Top of Sturdy Rigid Case Can Hold 3 Standard CR80 30 Credit / Drivers License Sized Badges. Carry all your cards in one holder - tough multi-card protector holds common access smartCards and Proxy Key-cards in One Case - Perfect for When Needed on a Regular Basis FAA, Security Access, Military, Customs, TSA, Port Authority, and Department of Homeland Security.

Quick release lanyard with safety breakaway clasp - features a detachable keychain with Metal Badge Clip - Carries Your Work Badges and Keys.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Height0.9 Inches
Length4.3 Inches
Weight0.13 Pounds
Width2.5 Inches
Part NumberSPID-9070
ModelSPID-9070

8. GOVO

#ad

Aluminum GOVO Badge Holder/Wallet_ Durable ID Card Holder with Metal Clip and 4 Cards Slot Silver

#ad
GOVO #ad - The steel clip can also be used as a cash clip. The spring holds cards on the sides so it won’t damage your cards or let them slip out. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards.

Patented clip: the first and only badge holder with a metal clip allow you to carry your ID on your belt, key chain, pocket, backpack or a lanyard. You can carry your credit cards, driver license and work ID all in one in this compact holder. The clip is made from manganese steel making it strong and durable. Unlike plastic retainer, metal spring does not lose elasticity. Designed and engineered by govo in ohio, usa.

Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity. Aluminum version weights 1. 8 oz. Long-lasting: the holder’s main body is milled from one piece of aluminum making it durable, light weight, water resistant and sweat resistant. The opening on top of the clip is designed for connecting to lanyard or carabiner. The transparent screen is made from 2mm thick polycarbonate.
BrandGOVO #ad
ManufacturerGOVO #ad
Height0.38 Inches
Length3.8 Inches
Weight0.11 Pounds
Width2.6 Inches
Part NumberGOVO00860415002088

9. ELV

#ad

ID Badge Card Holder Wallet with 5 Card Slots, Driver Licence, ELV Badge Holder, School ID, Retractable Reel and Neck Lanyard Strap for Offices ID, 1 RFID Blocking Pocket

#ad
ELV #ad - Innovation design: great badge holder for those need multiple badges, cards, Government Employees and More, School ID, drivers license, suitable for ID badges, laundry card, Airports, tickets and money Offices, debit cards, etc.

Size: holder size: 4. 8"l x 3. 5"w12. 2cm x 8. 9cm; 1 lanyard full round length; 1 Retractable Reel with Belt Clip. Strong lanyard: 1pc strong yet soft detachable Neck Lanyard for the holder. Id window with clear cover features visibility and protection, makes it easy to scan ID Cards. Badge holder structure: 1 clear id window + 1 open card slot with pull tab front + 3 covered card slots back + 1 RFID BLOCKED cash slot with zipper pocket side.

No need to worry about cards could accidentally slip out or lanyard rips any more. Material: id holder and lanyard are made by pu leather, and combine with top grade hardware with safety side zipper and back closer. This badge holder with large capacity.
BrandELV #ad
ManufacturerELV #ad
Height5.5 Inches
Length5 Inches
Width0.6 Inches
Part NumberBADGE-2CLIP-BLK