As an Amazon Associate I earn from qualifying purchases.
ID Stronghold #ad - Made in USA. This badge Holder can hold two cards. Blocks rfid chips in cards from being read without permission. Physically protects card, weather and water resistant. Fips 201 approved products List APL.
Specialist ID #ad - Rfid card protection - fips 201 approved rfid id badge blocker - helps to Prevent Your RFID Card Info From Being Skimmed - Blocks 13. 56mhz radio Frequency Signal.
Vertical or horizontal display - hard plastic slot hole for Portrait or Landscape Hold - Attaches Well with Vinyl Strap Clip or Plastic Clips - Hang from Lanyard or Badge Reel. Remove card to scan - cards must be removed from Holder to Scan - Can Partially Slide Card Chip End for Card Reading Access at Security Checkpoint.
ID Stronghold #ad - No more removing your card from a shielded holder to be read at access point. Physically protects card, weather and water resistant. Made in usa. If you have a 125khz hid prox card you should order our BloxProx tm version as it protects both frequencies.
Fips 201 approved. Simply squeeze the top like a clip board and the card shielding is removed and card can be read.
Let go and card automatically becomes shielded again. True stainless steel spring clips. This holder is designed for 13. 56mhz id cards such as the military CAC, US Government PIV, HID iClass and more. Holds 1 contactless rfid ID card and blocks card from being scanned without your knowledge. Patented squeeze-to-read technology for ease of use.
Uniclife #ad - 2-card holder: inner size: 3. 9" l x 2. 2" w. Easy to open the door without removing the badge or key. Dual-purpose: ideal for displaying your ID card due to its clear front window. The 1 mm steel wire rope can stretch up to 31.
5". Suitable for 2 standard-sized cards like credit cards, access cards, ID cards, passes or clipper cards. Quick access: easy to open the case by sliding the back cover up and close the case by sliding it down.
Easily carry around your items by fixing it on your pocket, belt loop, backpack or zipper. But fit 1 proximity card or RFID badge ONLY! Retractable keychain: with built-in stainless steel spring coils, it has strong retraction force to endure pulls over 10, 000 times and hold up to 8 oz. A cinch to encase or remove your badges or cards without effort.
Secure Badgeholder #ad - Slim design: looks sharp and available in 9 colors to match your uniform, work or business attire. Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Usa designed, molded and assembled - Our slim polycarbonate frame is tough as nails and will last you for years! Indestructible: Molded from Poly Carbonate for military level toughness and durability.
ID Stronghold #ad - Rfid shielded - protect your contactless cards from electronic pickpockets with the industry's best. Usa designed, molded and assembled - our slim polycarbonate frame is tough as nails and will last you for years! 3 card holder - securely holds one card on each side so both cards are easily displayed.
ELV #ad - This badge holder with large capacity. Material: id holder and lanyard are made by pu leather, and combine with top grade hardware with safety side zipper and back closer. Size: holder size: 4.
8"l x 3. 5"w12. 2cm x 8. 9cm; 1 lanyard full round length; 1 Retractable Reel with Belt Clip. Strong lanyard: 1pc strong yet soft detachable Neck Lanyard for the holder. Innovation design: great badge holder for those need multiple badges, School ID, suitable for ID badges, debit cards, Airports, Government Employees and More, laundry card, drivers license, cards, tickets and money Offices, etc.
Badge holder structure: 1 clear id window + 1 open card slot with pull tab front + 3 covered card slots back + 1 RFID BLOCKED cash slot with zipper pocket side. Id window with clear cover features visibility and protection, makes it easy to scan ID Cards. No need to worry about cards could accidentally slip out or lanyard rips any more.
Pauner #ad - The nfc rfid blocking function improves security level, smart card, twic card HSPD 12 PIV credentials PIV card, because it protects your contactless card from unauthorized reading which might be nowadays possible by criminals. This rfid blocker badge holder is made by rfid protection material which blocking rfid reading when cards are in the id card holder.
To other side you can insert and remove the RFID card sliding from the side. When you need to present your card to reader, you can easily remove your card from the card holder and put the card back to the holder.
This rfid protection card holder holds one or two cards which are size as standard credit card. You can put one card to both sides of the badge holder so this holds two cards. Together the reelstrap and the RFID blocking card holder are perfect lanyard badge holder. That´s why this rfid blocking badge holder is important to use for cards as cac card, Fed ID card and for personal contactless debit card. This rfid safe badge holder is GSA FIPS 201 Approved.
MURADIN #ad - Functional designs for convenient use – the patent-pending card holding mechanism is designed for secure holding. The attachment point offers an option to attach with lanyards, keyrings, and carabiners. Get all you need in a minimal way – minimalist appearance with an excellent structure design has all functions a traditional wallet supposed to have.
Store all your everyday-carry cards and cash in a super slim metal wallet which perfectly mixed outdoor style, and tactical style. Load and unload cards with a simple slide action via the bottom opening.
The removable vintage rivets element presents classic style, the extendable design allows future updates. The extreme strong structure design guarantee never being out of shape for a lifetime. Stylish design | classical elements – round angle and edge design efficiently reduced cutting hazards while using, keep some senses of line style elements design meanwhile. Premium material | superb machining craft – muradin badge holders are made from aerospace-grade aluminum.
1. ID Stronghold
#adRFID Blocking Secure Badge Holder, USA Molded and Assembled, FIPS 201 Approved, ID Stronghold, Black, Duolite 2 Card ID Holder, Poly Carbonate, Heavy Duty Hard Plastic ID Badge Holder
#adMore information #ad
| Brand | ID Stronghold #ad |
| Manufacturer | ID Stronghold #ad |
| Height | 0.31 Inches |
| Length | 4 Inches |
| Width | 2.38 Inches |
| Part Number | IDSH2004-001B |
| Model | IDSH2004-001B |
More information #ad
2. Specialist ID
#adDual Sided Shield Blocks 13.56MHz Radio Signal, RFID Blocking ID Badge Holder Holds 2 Cards, Specialist ID Black, SkimSAFE FIPS 201 Approved
#adVertical or horizontal display - hard plastic slot hole for Portrait or Landscape Hold - Attaches Well with Vinyl Strap Clip or Plastic Clips - Hang from Lanyard or Badge Reel. Remove card to scan - cards must be removed from Holder to Scan - Can Partially Slide Card Chip End for Card Reading Access at Security Checkpoint.
More information #ad
Sturdy and secure - allows cards to slide from the top or Bottom on Either Side - Won't Scratch Barcodes on Card - Cards Remove Easily and Snap Back in Place. Two card holder - open face, twic, dod, piv, work id, double sided - perfect Solution for Holding 2 Proximity Cards, Credit Cards, Government and Military CAC.| Brand | Specialist ID #ad |
| Manufacturer | Specialist ID #ad |
| Height | 0.25 Inches |
| Length | 3.74 Inches |
| Weight | 0.03 Pounds |
| Width | 2.5 Inches |
| Part Number | AH-210-BLACK |
| Model | AH-210BLK |
More information #ad
3. ID Stronghold
#adClear, USA Molded and Assembled, Heavy Duty Hard Plastic ID Badge Holder, Secure RFID Badge Holder for 1 Card, FIPS 201 Approved RFID Blocking Security, Identity Stronghold
#adFips 201 approved. Simply squeeze the top like a clip board and the card shielding is removed and card can be read.
More information #ad
Id stronghold made the first ever fipS 201 approved shielded holders and has more FIPS 201 approved shielded products than any other manufacturer. Molded and assembled in Florida. Let go and card automatically becomes shielded again. True stainless steel spring clips. This holder is designed for 13. 56mhz id cards such as the military CAC, US Government PIV, HID iClass and more. Holds 1 contactless rfid ID card and blocks card from being scanned without your knowledge. Patented squeeze-to-read technology for ease of use.
| Brand | ID Stronghold #ad |
| Manufacturer | ID Stronghold #ad |
| Height | 0.5 Inches |
| Length | 4.5 Inches |
| Width | 2.75 Inches |
| Part Number | IDSH1004-001B |
More information #ad
4. Uniclife
#adUniclife Sliding Badge Holder Vertical Plastic Case with Retractable Keychain Badge Reel for up to 8 oz Hard Card Protector for ID Credit Cards Proximity Key Cards Driver’s Licenses and Passes, 2 Pack
#ad5". Suitable for 2 standard-sized cards like credit cards, access cards, ID cards, passes or clipper cards. Quick access: easy to open the case by sliding the back cover up and close the case by sliding it down.
More information #ad
And easy to hide the magnetic card on the back for frequent scanning without removing the case. Easy to carry: each keychain with sturdy abs casing is heavy-duty and won’t be broken even if dropped or bumped frequently. Easily carry around your items by fixing it on your pocket, belt loop, backpack or zipper. But fit 1 proximity card or RFID badge ONLY! Retractable keychain: with built-in stainless steel spring coils, it has strong retraction force to endure pulls over 10, 000 times and hold up to 8 oz. A cinch to encase or remove your badges or cards without effort.
| Brand | Uniclife #ad |
| Manufacturer | Uniclife #ad |
| Part Number | Uniclife-810 |
| Warranty | one year warranty |
More information #ad
5. Secure Badgeholder
#adRFID Blocking Secure Badge Holder Lite – Vertical 1 Card Holder – Heavy Duty Hard Plastic ID Card Holder – Molded and Assembled in The USA – Black – Quanty 1
#adMore information #ad
1 card holder: conveniently carries one key card, held tight so you never lose your identification.| Brand | Secure Badgeholder #ad |
| Manufacturer | ID Stronghold #ad |
| Height | 2.37 Inches |
| Length | 4 Inches |
| Width | 0.25 Inches |
| Part Number | IDSH9001-001B-Blk |
| Model | IDSH9001-001B-Blk |
More information #ad
6. ID Stronghold
#adHeavy Duty Plastic Badge Protector, ID Stronghold Secure Badge Holder Duolite, PIV, CAC and Work Cards, FIPS 201 Approved, RFID Blocking 2 Card ID Badge Holder with Lanyard and Retractable Reel
#adMore information #ad
Lanyard & reel included - 36 x 3/8" Lanyard with J Hook & Carabiner Retractable Badge Reel. Id stronghold is the original rfid blocking Company with FIPS 201 Approval for all our ID holders.| Brand | ID Stronghold #ad |
| Manufacturer | ID Stronghold #ad |
| Height | 1 Inches |
| Length | 5 Inches |
| Weight | 0.09 Pounds |
| Width | 4 Inches |
| Part Number | IDSH2047 |
More information #ad
7. ELV
#ad1 RFID Blocking Pocket, Retractable Reel and Neck Lanyard Strap for Offices ID, ELV Badge Holder, Driver Licence, ID Badge Card Holder Wallet with 5 Card Slots, School ID
#ad8"l x 3. 5"w12. 2cm x 8. 9cm; 1 lanyard full round length; 1 Retractable Reel with Belt Clip. Strong lanyard: 1pc strong yet soft detachable Neck Lanyard for the holder. Innovation design: great badge holder for those need multiple badges, School ID, suitable for ID badges, debit cards, Airports, Government Employees and More, laundry card, drivers license, cards, tickets and money Offices, etc.
More information #ad
Badge holder structure: 1 clear id window + 1 open card slot with pull tab front + 3 covered card slots back + 1 RFID BLOCKED cash slot with zipper pocket side. Id window with clear cover features visibility and protection, makes it easy to scan ID Cards. No need to worry about cards could accidentally slip out or lanyard rips any more.
| Brand | ELV #ad |
| Manufacturer | ELV #ad |
| Height | 5.5 Inches |
| Length | 5 Inches |
| Width | 0.6 Inches |
| Part Number | BADGE-2CLIP-BLK |
| Model | BADGE-2CLIP-BLK |
More information #ad
8. Identity Stronghold
#adClear IDSH1004-001B-clr, Identity Stronghold Secure Badge Holder Classic
#adIdentity Stronghold #ad - User can easily insert and remove card from holder with one hand. 100% made in USA. Blocks rfid chips in cards from being read without permission. Fips 201 approved Products. Physically protects card, weather- and water-resistant.More information #ad
| Brand | Identity Stronghold #ad |
| Manufacturer | Identity Stronghold #ad |
| Height | 1 Inches |
| Length | 4.5 Inches |
| Weight | 0.02 Pounds |
| Width | 3 Inches |
| Part Number | IDSH1004-001B-clr |
| Model | IDSH1004-001B-clr |
More information #ad
9. Pauner
#adRFID Blocking ID Badge Holder RFID Safe CAC Card Protector id Holder for 2 Cards for twic Card piv Credentials hspd 12 fed id Card lincpass Smart Card 1
#adTo other side you can insert and remove the RFID card sliding from the side. When you need to present your card to reader, you can easily remove your card from the card holder and put the card back to the holder.
More information #ad
And you can also slide the card about halfway out easily with one hand when you need present the card to the access control door reader. This rfid blocker badge holder is compatible also with the ReelStrap which is very useful adjustable retractable lanyard ID holder. This rfid protection card holder holds one or two cards which are size as standard credit card. You can put one card to both sides of the badge holder so this holds two cards. Together the reelstrap and the RFID blocking card holder are perfect lanyard badge holder. That´s why this rfid blocking badge holder is important to use for cards as cac card, Fed ID card and for personal contactless debit card. This rfid safe badge holder is GSA FIPS 201 Approved.
| Brand | Pauner #ad |
| Manufacturer | Pauner #ad |
| Height | 2.36 Inches |
| Length | 3.9 Inches |
| Weight | 0.04 Pounds |
| Width | 0.28 Inches |
| Part Number | 12568 |
| Model | 12568 |
More information #ad
10. MURADIN
#adMURADIN Blue Badge Holder for ID & Cards – Metal Card Holder RFID Wallets – Minimalist Badge Holder for Men
#adStore all your everyday-carry cards and cash in a super slim metal wallet which perfectly mixed outdoor style, and tactical style. Load and unload cards with a simple slide action via the bottom opening.
More information #ad
A concealed compartment features for cash and small gadgets storing. The excellent anodized process makes the touch feeling smooth and comfortable. Grab this minimal wallet up for birthday, valentine's Day, Anniversary Day, Father's Day and Christmas Day, even a regular day you want to surprise your loved one. The removable vintage rivets element presents classic style, the extendable design allows future updates. The extreme strong structure design guarantee never being out of shape for a lifetime. Stylish design | classical elements – round angle and edge design efficiently reduced cutting hazards while using, keep some senses of line style elements design meanwhile. Premium material | superb machining craft – muradin badge holders are made from aerospace-grade aluminum.
| Brand | MURADIN #ad |
| Manufacturer | MURADIN #ad |
| Height | 0.5 Inches |
| Length | 4 Inches |
| Width | 3 Inches |
| Part Number | V02 |
More information #ad
