Industrial & Scientific

Pentek PD-5-20 Polypropylene Filter Cartridge, 20″ x 2-1/2″, 5 Microns

#ad
#ad
Pentair Industries PD-5-20 #ad - This pentek pd-5-20 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.

SpecificationsNominal filtration rating5 micronsInitial pressure drop at 5 gpm. It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 5 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release.

Pentek PD-5-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 5 Microns #ad - It has a nominal filtration rating of 5 microns at an efficiency of 85%.

More information about Pentair Industries PD-5-20 #ad

Pentek PD-1-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 1 Microns

#ad
#ad
Pentair Industries PD-1-20 #ad - This pentek pd-1-20 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.

Pentek PD-1-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 1 Microns #ad - SpecificationsNominal filtration rating1 micronInitial pressure drop at 5 gpm. It has a nominal filtration rating of 1 micron at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release. It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 5 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4.

4 to 79. 4 degrees C.

More information about Pentair Industries PD-1-20 #ad


Similar products



Pentek 150578 MC-1A Bracket for 3/4" 3G Filter Housings

#ad
#ad
Pentair Industries 150578 #ad - Bonded polypropylene microfiber for resistance to chemicals and bacteria. It is made of strong metal. This pentek 150578 mc-1a bracket is used to mount filter housings on a vertical surface. The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

What’s in the box?pentek mc-1a filter housing bracket 4 mounting screws Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 1 micron. This bracket is used with pentek #10 and #20 3g mb housings with 3/4" connections, including drinking water purification, irrigation, and industrial processes, which are used in a wide variety of applications, among others.

Pentek 150578 MC-1A Bracket for 3/4" 3G Filter Housings #ad - Water filters remove undesirable particles, chemicals, adsorption, and microorganisms from water by means of a semipermeable barrier, or biological processes. Use with pentek #10 and #20 3/4" 3G MB housings. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

Made of strong metal. Initial pressure drop of less than 2 psi at a flow rate of 5 gpm. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

More information about Pentair Industries 150578 #ad


Similar products



Pentek PD-25-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 25 Microns

#ad
#ad
Pentair Industries PD-1-934 #ad - The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release. This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications.

Specificationsnominal filtration rating25 micronsInitial pressure drop at 5 gpm. This pentek pd-25-20 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 5 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4.

Pentek PD-25-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 25 Microns #ad - 4 to 79. 4 degrees C. It has a nominal filtration rating of 25 microns at an efficiency of 85%.

More information about Pentair Industries PD-1-934 #ad


Similar products



Pentek PD-10-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 50 Microns

#ad
#ad
Pentair Industries PD-10-20 #ad - This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications. Specificationsnominal filtration rating10 micronsInitial pressure drop at 5 gpm.

It has a nominal filtration rating of 10 microns at an efficiency of 85%. This pentek pd-10-20 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release.

Pentek PD-10-20 Polypropylene Filter Cartridge, 20" x 2-1/2", 50 Microns #ad - It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 5 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C.

More information about Pentair Industries PD-10-20 #ad


Similar products



Pentek 150560 3/4" #20 3G Standard Clear Housing with Pressure Relief

#ad
#ad
Pentair Industries 3/4" 3G Standard NPT #ad - Initial pressure drop of 1 psi at a flow rate of 10 gpm. The housing can be used with a 20" x 2-1/2" sediment or carbon filter cartridge sold separately. Initial pressure drop of less than 2 psi at a flow rate of 5 gpm. Water filters are used in a wide range of applications, industrial processes, including drinking water purification, and irrigation, swimming pools, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. Initial pressure drop of less than 2 psi at a flow rate of 5 gpm. It has an initial pressure drop of 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F 51.

Pentek 150560 3/4" #20 3G Standard Clear Housing with Pressure Relief #ad - 7 degrees C. Made of strong metal. Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 25 microns. Pressure relief button makes changing cartridges easier. Standard filter housing for residential, commercial, and industrial applications.

Initial pressure drop of less than 2 psi at a flow rate of 5 gpm. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

More information about Pentair Industries 3/4" 3G Standard NPT #ad


Similar products



Pentek EP-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 5 Microns

#ad
#ad
Pentair Industries EP-20 #ad - Mounting bracket for filter housings. The filter will reduce free available chlorine fAC at 2 parts per million ppm by at least 90% in up to 12, 000 gallons at a flow rate of 2 gallons per minute gpm. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Standard filter housing for residential, commercial, and industrial applications.

Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 10 microns. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Pentek EP-20 Carbon Block Filter Cartridge, 20" x 2-7/8", 5 Microns #ad - Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Nominal filtration rating of 5 microns.

More information about Pentair Industries EP-20 #ad


Similar products



Elkay 51300C_3PK WaterSentry Plus Replacement Filter Bottle Fillers, 3-Pack

#ad
#ad
Elkay 51300C_3PK #ad - Made of strong metal. Mounting bracket for filter housings. Many also reduce contaminants such as lead. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 25 microns. Initial pressure drop of less than 2 psi at a flow rate of 5 gpm.

Water filters provide cleaner, great tasting water for drinking fountains, water coolers and bottle fillers. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Also reduces odors and discoloration from incoming water.

Elkay 51300C_3PK WaterSentry Plus Replacement Filter Bottle Fillers, 3-Pack #ad - Spun polypropylene prefilter mesh to prevent large, coarse sediment and particles from entering and clogging filter media. Filter is certified to nsf 42 and 53 for lead, particulate class 1, chlorine, taste and odor reduction. Elkay’s filters are easy to connect and are self-contained replaceable cartridges, limiting exposure to contaminated media.

Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 10 microns. Initial pressure drop of less than 2 psi at a flow rate of 5 gpm.

More information about Elkay 51300C_3PK #ad


Similar products



Hydronix SDC-25-2005/4 SDC-25-2005 4 Pack Sediment Filters 2.5 x 20, 2.5" x 20", White

#ad
#ad
Hydronix SDC-25-2005/4 #ad - Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Fits all 20" x 2. 5" multistage or single stage filtration system housings. Bonded polypropylene microfiber for resistance to chemicals and bacteria. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water.

Mounting bracket for filter housings. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. This sediment filter is suitable for use in filtration systems such as ice machines, beverage, analytical, Wineries, film processing, coffee, and many others. Temperature range of 40 to 175 degrees F 4. 4 to 79.

Hydronix SDC-25-2005/4 SDC-25-2005 4 Pack Sediment Filters 2.5 x 20, 2.5" x 20", White #ad - 4 degrees C. Nominal filtration rating of 5 microns. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. 20" x 2. 5" size.

More information about Hydronix SDC-25-2005/4 #ad


Similar products



Scotch Transparent Tape, Standard Width, Engineered for Office and Home Use, Glossy Finish, 3/4 x 1296 Inches, 6 Rolls, Boxed 600-6PK

#ad
#ad
3M Office Products 600-6PK #ad - Made of strong metal. It's clearly strong-holds things together in an instant; keeps things together for a long time. Temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. Multi-pack replacement filters for models with WaterSentry Plus filtration system Bottle Fillers. Filter should be replaced every 3, 000 gallons or 1 year after installation.

Equipped with quick-disconnect, 1/4 turn installation, as well as automatic inlet shut-off valve that closes when filter is removed. Designed to reduce lead, particles and chlorine. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Initial pressure drop of 3. 4 psi at a flow rate of 2 gpm. Whatever you need to get done, wherever you are-home, work or school-Scotch Transparent Tape Refill Rolls are clearly ready to go to work.

Scotch Transparent Tape, Standard Width, Engineered for Office and Home Use, Glossy Finish, 3/4 x 1296 Inches, 6 Rolls, Boxed 600-6PK #ad - 20" x 2. 5" size. Mounting bracket for filter housings. Bonded polypropylene microfiber for resistance to chemicals and bacteria. Reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications.

More information about 3M Office Products 600-6PK #ad


Similar products



LSE Lighting Combo Package UV Bulb and Quartz Sleeve for Pura UV #20 Addon-3 UV20 UVBB

#ad
#ad
Light Spectrum Enterprises, Inc TRTD1161 #ad - Initial pressure drop of less than 2 psi at a flow rate of 5 gpm. Made of strong metal. Nominal filtration rating of 5 microns. Initial pressure drop of 1 psi at a flow rate of 10 gpm. Also reduces odors and discoloration from incoming water. Spun polypropylene prefilter mesh to prevent large, coarse sediment and particles from entering and clogging filter media.

Filter is certified to nsf 42 and 53 for lead, particulate class 1, chlorine, taste and odor reduction.5 micron, 60-120 psi, nsf 42 certified. Initial pressure drop of 3. 4 psi at a flow rate of 2 gpm. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Fits all 20" x 2.

LSE Lighting Combo Package UV Bulb and Quartz Sleeve for Pura UV #20 Addon-3 UV20 UVBB #ad - 5" multistage or single stage filtration system housings. This combo package kit by lse lighting brand is 100% compatible replacement for use with Pura UV #20 Addon-3 UV20 UVBB. All lamps/quartz sleeves listed are compatible brand LSE Lighting UV products. Use with pentek #10 and #20 3/4" 3G MB housings. Combo package kit: includes the following: 1 Bulb and 1 Quartz Sleeve.

More information about Light Spectrum Enterprises, Inc TRTD1161 #ad


Similar products