Industrial & Scientific

Legris 3008 56 14 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, Branch Tee, 1/4″ Tube OD x 1/4″ NPT Female

#ad
#ad
Parker Legris #ad - Push-to-connect connections do not require tools or sealants. This fitting is made of nylon and nickel-plated brass — nylon for strength and flexibility, and nickel plating on its brass sub-base for ferromagnetic and corrosion resistance, abrasion resistance, light weight, strength at high temperatures, and resistance to crushing and cracking, and toughness and ductility at low temperatures.

They are made of brass, pBT polybutylene terephthalate, stainless steel, and other materials that resist corrosion and wear. Dimensions for tees are represented as A x B x C. Branch tee for connecting two tubes to a male thread at a 90-degree angle. The company, founded in 1918, is headquartered in Cleveland, OH.

Legris 3008 56 14 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, Branch Tee, 1/4" Tube OD x 1/4" NPT Female #ad - The fitting is suitable for handling pressures up to 290 psi 20 bar, has an operating temperature range of -20 to +80 degrees C -4 to +176 degrees F, and has a vacuum capability of 755 mm Hg. The npt threads create a tighter seal than straight threads. Nylon body and nickel-plated brass sub-base. The branch tee fitting is t-shaped and has push-to connect tube connections on both ends of the main run and a female threaded connection on the branch at a 90-degree angle from the middle of the tee.

This branch tee is suitable for use in air, water, oil, chemical, and food applications. Tube fittings are components used for connecting, terminating, branching, and changing the direction of tubing in pneumatic and hydraulic systems.

More information about Parker Legris #ad

1/4" OD x 50' SAE J844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider

#ad
#ad
Power Products C604 #ad - 1/4" OD x 50' SAE J844 Nylon Air Brake Tubing Suspenion Horn Train Lowrider #ad - 1/4" od x 50' sae j844 nylon Air Brake Tubing.

More information about Power Products C604 #ad


Similar products



Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee

#ad
#ad
Utah Pneumatic #ad - Never apply tube joint with additional external loadbending, twist or pulling, otherwise damage or leakage will be occurred. Caution check the end of tubing for a right angle cutting and check the external surface of tubing for any damage or scratch. Please refer to following instruction in connection of tubing.

When you insert the air tubing into the joint, you will have two-step feeling. Section one is locking claw and section two is sealing ring. Must insert tube into section two. Sleeve is used in tubing connection and disconnection. The sleeve is designed as an oval shape, which is covienient in assembly and disassembly.

Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock 1/4 inch tee #ad - However, round sleeve is available to met any special demand the product has limited space for oval sleeve. After connection of tube joint and tubing, always try to pull tubing and ensure its firm connection. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing.

Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. The tube fitting is prohibited if water temperature is above 60'C 4. User's Guide 1.

More information about Utah Pneumatic #ad


Similar products



PneumaticPlus BUC Series Push To Connect Straight Union Ball Valve 1/4" OD X 1/4" OD Tube

#ad
#ad
PneumaticPlus #ad - Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Applicable for water Max Pressure: 50 PSI and Air Max. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2.

PneumaticPlus BUC Series Push To Connect Straight Union Ball Valve 1/4" OD X 1/4" OD Tube #ad - 7 ounces/size:1/4 inch od. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Pressure: 284 psi when using with water, the pressure must not exceed 50 PSI. Working temperature: 32 - 140 F. Composite fitting Push to Connect Tube to Tube. Applicable for water max pressure: 50 psi and air Max.

. Pressure: 284 psi when using with water, the pressure must not exceed 50 PSI. Available for water as well as air with PPS resin body. The sectional dimension of the compact body optimizes as much flow as the tube capacity in proportion. Resin body PBT.

More information about PneumaticPlus #ad


Similar products



Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4

#ad
#ad
Malida #ad - Applicable for water max pressure: 50 psi and air Max. Pressure gauge pack includes: 1 x pressure gauge with ¼" male connection 1 x ¼" female to ¼" push fit 1 x ¼" Stem to ¼" push fit to ¼" push fit T Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Stainless pressure Gauge 220 PSI with fitting.

The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Using a pressure gauge with your reverse osmosis system can be a great addition to your system as most problems that occur with reverse osmosis systems can relate to your water pressure. Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing.

Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4 #ad - Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other. Pressure: 284 psi when using with water, the pressure must not exceed 50 PSI. Available for water as well as air with PPS resin body. The sectional dimension of the compact body optimizes as much flow as the tube capacity in proportion.

Resin body PBT. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg.

More information about Malida #ad


Similar products



Legris 3008 60 14 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, Branch Tee, 3/8" Tube OD x 1/4" NPT Female

#ad
#ad
Parker Legris 377PLP-6-4 #ad - This fitting is made of nylon and nickel-plated brass — nylon for strength and flexibility, and resistance to crushing and cracking, strength at high temperatures, light weight, abrasion resistance, and nickel plating on its brass sub-base for ferromagnetic and corrosion resistance, and toughness and ductility at low temperatures.

. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Stainless pressure Gauge 220 PSI with fitting. The company, founded in 1918, is headquartered in Cleveland, OH. Applicable for water max pressure: 50 psi and air Max. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC.

Legris 3008 60 14 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, Branch Tee, 3/8" Tube OD x 1/4" NPT Female #ad - Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. The branch tee fitting is t-shaped and has push-to connect tube connections on both ends of the main run and a female threaded connection on the branch at a 90-degree angle from the middle of the tee. Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe.

Fluid admitted:air vacuum Water liquifit push to connect fitting kits quick connect fitting water no freezing. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg.

More information about Parker Legris 377PLP-6-4 #ad


Similar products



Vixen Horns 1/4" OD Nylon Plastic Hose Up to 225PSI 20 Feet for Train/Air Horn Systems and Other Suspension Applications VXA7142

#ad
#ad
Vixen Horns #ad - Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. Its operating pressure rating is 225PSI and can flow air or water while handling temperatures of -4F to 248F. Outer diameter OD: ¼ inch. Inner diameter ID: 1/8 inch. Wall thickness: 1/16 inch. Branch tee for connecting two tubes to a male thread at a 90-degree angle.

The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Female npt threaded connection on the branch and push-to-connect connections on the main run. Applicable for water max pressure: 50 psi and air Max. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC. Proof pressure:| 120psi.

Vixen Horns 1/4" OD Nylon Plastic Hose Up to 225PSI 20 Feet for Train/Air Horn Systems and Other Suspension Applications VXA7142 #ad - Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Composite fitting Push to Connect Tube to Tube. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg.

Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg.

More information about Vixen Horns #ad


Similar products



Parker Hannifin A4VC4-MG Nylon VC Check Valve, 1/4" Push-to-Connect Tube x 1/4" Push-to-Connect Tube

#ad
#ad
Parker Hannifin Corporation A4VC4-MG #ad - Compact. Parker's check valves allow compressed air to flow in one direction and prevent it from flowing in the other. Excellent vibration resistance. Fitted upstream of the circuit to be protected, they provide total protection. Outer diameter OD: ¼ inch. Female npt threaded connection on the branch and push-to-connect connections on the main run.

Inner diameter ID: 1/8 inch. Symbol showing the operating direction of flow. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. Lip seals for improved sealing performance.

Parker Hannifin A4VC4-MG Nylon VC Check Valve, 1/4" Push-to-Connect Tube x 1/4" Push-to-Connect Tube #ad - Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg. Working pressure: 225PSI. Lightweight. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Wall thickness: 1/16 inch.

Pressure: 284 psi when using with water, the pressure must not exceed 50 PSI.

More information about Parker Hannifin Corporation A4VC4-MG #ad


Similar products



Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Male NPT

#ad
#ad
Control Devices CR25-100 #ad - Compact. Female npt threaded connection on the branch and push-to-connect connections on the main run. Brass construction and stainless steel spring for corrosion resistance. Length: 20 Feet. Branch tee for connecting two tubes to a male thread at a 90-degree angle. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC.

Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Male NPT #ad - Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Wall thickness: 1/16 inch. Stainless pressure Gauge 220 PSI with fitting. Relief pressure adjustable from 0 to 100 psi. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Relief valves are used in a variety of applications, petrochemical and chemical manufacturing, such as air compressors, natural gas processing, and power generation.

Control devices manufactures valves and other flow control devices. Nylon body and nickel-plated brass sub-base. Type:air hose fittings/push fit/Push to connect tee shape Weight: 2. 7 ounces/size:1/4 inch od. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.

More information about Control Devices CR25-100 #ad


Similar products



1/4" Tube OD x 1/4" NPT Thread Pack of 10 - PneumaticPlus PC-1/4-N2 Push to Connect Tube Fitting, Male Straight

#ad
#ad
PneumaticPlus #ad - Branch tee for connecting two tubes to a male thread at a 90-degree angle. Elliptical sleeve configuration is ideal for easy to push and release the tubing. Pressure: 284 psi when using with water, the pressure must not exceed 50 PSI. Available for water as well as air with PPS resin body. The sectional dimension of the compact body optimizes as much flow as the tube capacity in proportion.

1/4" Tube OD x 1/4" NPT Thread Pack of 10 - PneumaticPlus PC-1/4-N2 Push to Connect Tube Fitting, Male Straight #ad - Resin body PBT. Body style: Male Straight. Female npt threaded connection on the branch and push-to-connect connections on the main run. Wall thickness: 1/16 inch. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.

Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Applicable for water max pressure: 50 psi and air Max. 1/4" tube od x 1/4" nPT Thread. Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PE / PA / PVC.

More information about PneumaticPlus #ad


Similar products



Brennan PCNY2502-04-04 PBT Push-to-Connect Tube Fitting, 90 Degree Elbow, 1/4" Tube OD x 1/4" NPT Female

#ad
#ad
Brennan Industries, Inc. #ad - Stainless pressure Gauge 220 PSI with fitting. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. This 90-degree elbow fitting, or "ell, " connects two pipes at a 90-degree angle to change the direction of flow between pipes. Working pressure: 225PSI.

Inner diameter ID: 1/8 inch. Body style: Male Straight. Handles pressures up to 290 psi 20 bar, operating temperature range of-20 to +80 degrees C -4 to +176 degrees F, and a vacuum capability of 755 mm Hg. Compact. Working temperature:0-60°c | 32~140°f/negative Pressure:-100Kpa | -29. 5 in Hg. Lightweight. 1/4" male npT threaded inlet connection.

Brennan PCNY2502-04-04 PBT Push-to-Connect Tube Fitting, 90 Degree Elbow, 1/4" Tube OD x 1/4" NPT Female #ad - Working pressure:0-1. 0mpa | 0-150psi/applicable tube:PU / PA / PE / PVC. Proof pressure:| 120psi. Seal o-ring:nbr/ lock claw:Stainless Steel SUS/Body:PlasticPET. Lip seals for improved sealing performance. The company, oh, founded in 1953 and headquartered in solon, meets International Organization for Standardization ISO 9001:2008 standards and its fittings meet Society of Automotive Engineers SAE specifications.

More information about Brennan Industries, Inc. #ad


Similar products