11/16″ – Oetiker Stepless OET070170-300PCK Clamp Assortment Case, Single Ear Hose Clamps without Pincers, 1/4″

#ad
#ad
Oetiker OET070170-300PCK #ad - The sizing references for PEX clamps are not the same as standard Oetiker clamps. Lightweight design and Tampering is visible. 14100386 oetiker hip compound Action Side Jaw Pincer, Item No. 16700017 genuine oetiker Clamps Stainless Steel, Material no. 16700010 50 of 15. 7 mm clamp, Part No. The hip tools have been designed especially for pinching ear clamps quickly and easily.

Mechanical interlock The interlock is a mechanical system for joining the clamp ends to permit closure. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. Specially formed strip edges reduce the risk of damage to the part being clamped.

11/16" - Oetiker Stepless OET070170-300PCK Clamp Assortment Case, Single Ear Hose Clamps without Pincers, 1/4" #ad - Narrow band, concentrated seal compression. Some interlock designs can be opened for radial installation prior to closure. Oetiker pex clamps should be used for PEX applications. 16700016 50 of 17 mm clamp, Part No. Because the tongue resides in a groove, the “tongue-in-groove” feature exerts pressure on the assembled parts over 360°, enabling the clamp to apply a continuous radial force completely around the connection’s diameter.

The listed size of the clamp denotes the inner diameter id of the clamp. 16700007 50 of 13.

More information about Oetiker OET070170-300PCK #ad

Oetiker HIP 2000 387 Compound Action Side Jaw Pincer

#ad
#ad
Oetiker 14100387 #ad - Made in the USA. Recommended for the installation of Oetiker ear clamps. Requires less hand force. The hip 2000 387 pincer is a compound action tool. Top sealing performance. Hand installation pincers HIP are recommended for the installation of Oetiker ear clamps. Easier to close. Compound action tools are easier to close as compared to single action tools and requires less hand strength for a safe and simple closure.

More information about Oetiker 14100387 #ad


Similar products



Oetiker 14100407-14100387 Hand Clamp Cutter and Compound Side Jaw Pincer, Combo Pack of 2

#ad
#ad
Oetiker 14100407-14100387 #ad - Stainless steel Band: cut clamps up to 9. 0 mm wide x 06 mm band thickness. Stainless steel Band: cut clamps up to 7. 0 mm wide x 08 mm band thickness. Oetiker hand cutter: quick and easy ear clamp cutting, requires minimal hand force. Hip compound action side jaw pincer oetiker Hand Installation Pincers HIP have been designed especially for Industrial and Vehicle applications to pinch ear clamps quickly and easily.

Easier to close. Recommended for the installation of Oetiker ear clamps. Requires less hand force. Hand clamp cutter, hcc 2000 | 407 recommended for the REMOVAL of Genuine Oetiker Ear Clamps. The hand clamp cutter hcc 2000 | 407 will cut the following EAR CLAMPS up to the band width and thicknesses listed. Made in the USA.

Oetiker 14100407-14100387 Hand Clamp Cutter and Compound Side Jaw Pincer, Combo Pack of 2 #ad - Both products are made in the usa. Steel band: cut clamps up to 9. 0 mm wide x 08 mm band thickness. Side jaw pincers: dual purpose side jaw design for access to confined areas.

More information about Oetiker 14100407-14100387 #ad


Similar products



Oetiker 18500060 StepLess 1-Ear Clamp Kit StepLess Ear Clamps, stainless steel with standard jaw single action pincer

#ad
#ad
OETIKER 18500060 #ad - Mechanical interlock for secure closure and better corrosion resistance than a spot-weld. They come in a variety of designs to distribute uniform pressure over the circumference of hoses to bind them to fittings. Oetiker manufactures hose clamps, conveyor chains, rings, hinged belts, couplings, and other connecting parts and accessories.

Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications. Other hose clamp types are used for mounting, strapping, clamping, and positioning hose or wire. Stainless steel for resisting scaling and corrosion. This clamp kit is suitable for attaching a variety of hoses to fittings or other devices in various industrial applications, irrigation, food processing, and petroleum industries, hydraulics, automobile manufacturing, such as heavy machinery, among others.

Oetiker 18500060 StepLess 1-Ear Clamp Kit StepLess Ear Clamps, stainless steel with standard jaw single action pincer #ad - Easier to close. Side jaw pincers: requires up to 30 percent less hand force during installation. The company, switzerland, founded in 1942 and headquartered in Horgen, meets International Organization for Standardization/Technical Specification ISO/TS standard 16949. Oetiker hand cutter: quick and easy ear clamp cutting, requires minimal hand force.

Corrosion resistance ≥ 1000 hours in compliance with DIN EN ISO 9227. Oetiker hand cutter: for clamp removal only, safest method of clamp removal.

More information about OETIKER 18500060 #ad


Similar products



Oetiker 14100082 Standard Jaw Pinchers 1098

#ad
#ad
OETIKER 14100082 #ad - Forged steel for strength and durability. Mechanical interlock for secure closure and better corrosion resistance than a spot-weld. Top sealing performance. Made in the USA. Oetiker hand cutter: for clamp removal only, safest method of clamp removal. Recommended for the installation of Oetiker ear clamps. Side jaw pincers: requires up to 30 percent less hand force during installation.

Oetiker hand cutter: quick and easy ear clamp cutting, requires minimal hand force. Side jaw pincers: dual purpose side jaw design for access to confined areas. Stainless steel for resisting scaling and corrosion. They are made of forged steel for strength and durability, and the rubber handle grips provide a sure hold.

Oetiker 14100082 Standard Jaw Pinchers 1098 #ad - Standard forward clamp blades on pincers for clamping perpendicular to the application. Rubber handle grips for a sure hold. These standard jaw pincers are for clamping Oetiker clamp models that are secured using pincers. Both products are made in the usa. Hose clamps are suitable for a large number of industries, electronic, and commonly used in industrial, and automotive applications.

Oetiker manufactures hose clamps, hinged belts, couplings, rings, conveyor chains, and other connecting parts and accessories.

More information about OETIKER 14100082 #ad


Similar products



Oetiker 16702498 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 16.6 mm Closed - 19.8 mm Open Pack of 25

#ad
#ad
Oetiker OET198 x 25 #ad - The hip tools have been designed especially for pinching ear clamps quickly and easily. Stainless steel for resisting scaling and corrosion. Side jaw pincers: dual purpose side jaw design for access to confined areas. Clamp ear is dimpled for increased clamp force. The sizing references for PEX clamps are not the same as standard Oetiker clamps.

Oetiker hand Clamp Cutter, Item No. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. Both products are made in the usa. Clamp diameter the following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, e.

Oetiker 16702498 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 16.6 mm Closed - 19.8 mm Open Pack of 25 #ad - G. Oetiker hand cutter: quick and easy ear clamp cutting, requires minimal hand force. Genuine oetiker clamps. Because the tongue resides in a groove, the “tongue-in-groove” feature exerts pressure on the assembled parts over 360°, enabling the clamp to apply a continuous radial force completely around the connection’s diameter.

Specially formed strip edges reduce the risk of damage to the part being clamped. Forged steel for strength and durability. Made in the USA.

More information about Oetiker OET198 x 25 #ad


Similar products



25.6 mm Open Pack of 25 - Oetiker 16700031 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 22.4 mm Closed

#ad
#ad
Oetiker OET256 x 25 #ad - The listed size of the clamp denotes the inner diameter id of the clamp. Oetiker hip compound Action, Standard Jaw Pincer, Item No. Specially formed strip edges reduce the risk of damage to the part being clamped. Please note - the size of the clamp denotes the inner dimension id of the clamp. Oetiker pex clamps should be used for PEX applications.

Corrosion resistance ≥ 1000 hours in compliance with DIN EN ISO 9227. Some interlock designs can be opened for radial installation prior to closure. Oetiker hand cutter: quick and easy ear clamp cutting, requires minimal hand force. Oetiker hand Clamp Cutter, Item No. Because the tongue resides in a groove, the “tongue-in-groove” feature exerts pressure on the assembled parts over 360°, enabling the clamp to apply a continuous radial force completely around the connection’s diameter.

25.6 mm Open Pack of 25 - Oetiker 16700031 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 22.4 mm Closed #ad - Requires less hand force. Side jaw pincers: requires up to 30 percent less hand force during installation. Rubber handle grips for a sure hold. Genuine oetiker clamps. 1. 4301/uns s30400 what is stepless technology? Oetiker invented the StepLess ear clamp in 1979.

More information about Oetiker OET256 x 25 #ad


Similar products



Oetiker 14100396 Pincer, Straight Jaw

#ad
#ad
Oetiker 14100396 #ad - Different jaws are available for different applications. Rubber handle grips for a sure hold. 360° stepless design - no steps or gaps on inner circumference. Corrosion resistance ≥ 1000 hours in compliance with DIN EN ISO 9227. Made in the USA. Easier to close. Recommended for the installation of Oetiker ear clamps.

Specially formed strip edges reduce the risk of damage to the part being clamped. Forged steel for strength and durability. Please note - the size of the clamp denotes the inner dimension id of the clamp. Top sealing performance. Both products are made in the usa. Narrow band, concentrated seal compression. Side jaw pincers: dual purpose side jaw design for access to confined areas.

Oetiker 14100396 Pincer, Straight Jaw #ad - Please note - the size of the clamp denotes the inner dimension id of the clamp. The oetiker 141 series of manual closing tools are light in design for ease of handling and installation of Oetiker clamps. Genuine oetiker clamps. 360° stepless design - no steps or gaps on inner circumference. Requires less hand force.

More information about Oetiker 14100396 #ad


Similar products



Oetiker 18500056 Service Kit 2-Ear Clamps, zinc plated with standard jaw single action pincers

#ad
#ad
OETIKER 18500056 #ad - Standard jaw pincers. Forged steel for strength and durability. Material: forged steel. Ear clamps also called pinch clamps are circular rings with one or two pinch points that pinch-clamp pincers can crimp for one-time installation; two-ear clamps accommodate a broader range of OD than one-ear clamps, and can be installed on thicker-walled hoses and tubes.

Genuine oetiker clamps. Standard jaw pincers included for crimping clamp ears closed for tamper-resistant seals. Smooth deburred edges prevent damage to clamped hoses during expansion and contraction. Made in the USA. Specially formed strip edges reduce the risk of damage to the part being clamped. Application: ear clamps.

Oetiker 18500056 Service Kit 2-Ear Clamps, zinc plated with standard jaw single action pincers #ad - Stainless steel for resisting scaling and corrosion. Specially formed strip edges reduce the risk of damage to the part being clamped. 360° stepless design - no steps or gaps on inner circumference. What’s in the box? 15 9mm 5/16" 2-ear clamps 15 11mm 3/8" 2-ear clamps 15 13mm 1/2" 2-ear clamps 15 15mm 9/16" 2-ear clamps 15 18mm 5/8" 2-ear clamps 12 20mm 3/4" 2-ear clamps 12 23mm 7/8" 2-ear clamps 12 25mm 15/16" 2-ear clamps 12 27mm 1" 2-ear clamps Pair of standard jaw pincers Storage case Recommended for the installation of Oetiker ear clamps.

Mechanical interlock for secure closure and better corrosion resistance than a spot-weld. Side jaw pincers: requires up to 30 percent less hand force during installation.

More information about OETIKER 18500056 #ad


Similar products



Hilitchi 70pcs Stainless Steel Single Ear Hose Clamps Kit

#ad
#ad
Hilitchi #ad - Narrow band, concentrated seal compression. Easier to close. Both products are made in the usa. Top sealing performance. High-quality 304 stainless steel, corrosion-resistant smooth inner circumference for 360 degree uniform seal Package quantity: 70pcs each 10pcs, Organized within a convenient plastic storage case Scope of 1/4'' ~ 13/16'' or 7mm-21mm Please note - the size of the clamp denotes the inner dimension id of the clamp Recommended for the installation of Oetiker ear clamps.

Genuine oetiker clamps. Oetiker hand cutter: quick and easy ear clamp cutting, requires minimal hand force. Clamp ear is dimpled for increased clamp force. Stainless steel for resisting scaling and corrosion. Scope of 1/4'' ~ 13/16'' or 7mm-21mm. Zinc-plated steel clamp construction to help resist corrosion. Corrosion resistance ≥ 1000 hours in compliance with DIN EN ISO 9227.

Hilitchi 70pcs Stainless Steel Single Ear Hose Clamps Kit #ad - Please note - the size of the clamp denotes the inner dimension id of the clamp. Package quantity: 70pcs each 10pcs, Organized within a convenient plastic storage case. Side jaw pincers: dual purpose side jaw design for access to confined areas. Forged steel for strength and durability.

More information about Hilitchi #ad


Similar products



Oetiker 14100083 OE 1099 Side Jaw Pincers

#ad
#ad
OETIKER 14100083 #ad - Made in the USA. Zinc-plated steel clamp construction to help resist corrosion. Stainless steel for resisting scaling and corrosion. Standard forward clamp blades on pincers for clamping perpendicular to the application. Please note - the size of the clamp denotes the inner dimension id of the clamp. Forged steel for strength and durability.

Tool acts at 90-degree angle to ear clamp for use where space is limited. Top sealing performance. Side-jaw pincers for use with ear-type clamps in hose fitting installation and removal. Standard jaw pincers included for crimping clamp ears closed for tamper-resistant seals. Scope of 1/4'' ~ 13/16'' or 7mm-21mm.

Oetiker 14100083 OE 1099 Side Jaw Pincers #ad - Please note - the size of the clamp denotes the inner dimension id of the clamp. Please note - the size of the clamp denotes the inner dimension id of the clamp. Specially formed strip edges reduce the risk of damage to the part being clamped. Side jaw pincers: requires up to 30 percent less hand force during installation.

Steel construction for strength and durability. Genuine oetiker clamps. Plastic-coated handles for work safety.

More information about OETIKER 14100083 #ad


Similar products